|
|
 |
|
|
|
|
|
|
 |
Built in Infra-Red Remote Control and Projector Trigger
All Cyber electric screens feature built in infra-red remote control and come with a simple hand held remote that can be programmed with most learning remote controls. The IR receiver is located on the front of the curved case but should the screen be installed behind a pelmet or recessed into the ceiling, a small external IR eye is included. Fitted to the side the case is a 12volt trigger input, this allows the screen to be activated from any projector or surround sound amp with a 12volt output. A 10m mono mini jack cable is included to connect the screen to a 12volt output device. |
| |
|
|
 |
Superior screen material
The material on a Tab Tension screen is not only pulled down by the weight of the bar but also from the left and right side by a Nylon string. The string is periodically connected to the material via small "Tabs", hence the name Tab Tension.
Unlike a standard screen, a Tab Tension screen has a flexible material so that it can be pulled taught from all sides. The Grandview Cyber screens have a unique ratchet mechanism at each end of weighted bar so that the tensioning strings can be easily adjusted. The US made material is optimised for home cinema use, producing a high contrast and uniform reflectivity. A black PVC backing prevents light leakage so that the screen can be positioned in front of a window.
|
|
|
Mounting Bracket and Casing
Cyber projection screens feature one of the best mounting systems on the market. Two small "L" shaped brackets fit to the wall or ceiling anywhere along the length of the case. Once the screen is clipped into the brackets an aluminium lever secures it in position. The aluminium diamond white case has an elegant curved profile making it one of the nicest looking screens on the market. The rigid sturdy design keeps the internal roller perfectly straight and any motor noise to a minimum. The Cyber series projector screens all use SOMFY motors, the same motors found in the likes of Dalite and Stuart cinema screens.
Sizes
Just like televisions, projector screens are measured in imperial feet and inches.
The material itself is measured in feet from left to right and the white viewable area in diagonal inches. The top header border of the screen can be adjusted from 0 to 20". |
|
|
|
Size |
Viewing Area |
Diagonal |
Case Size( w x h x d) |
 |
|
|
|
|
6ft 16:9 Screen |
67" x38" |
77" |
2195 x 145 x 135mm |
|
7ft 16:9 Screen |
79" x 45" |
92" |
2530 x 145 x 135mm |
|
8ft 16:9 Screen |
92" x 52" |
106" |
2834 x 145 x 135mm |
|
9ft 16:9 Screen |
104" x 58" |
120" |
3150 x 145 x 135mm |
|
|
All the above screens come in a white case |
|
|
|
|
|
|
|
| |
